Processor

• i.MX6ULL (ARM Cortex-A7) @ 900MHz or 800MHz

RAM

• 256 to 512Mbytes DDR3L 16bits (256Mbytes by default)

Storage

• 4 to 32Gbytes eMMC (4Gbytes by default)

Wireless connectivity (option)

• Wi-Fi b/g/n with U.FL connector
• Bluetooth 4.1 (BLE compatible)

Peripherals⁽²⁾

• UART: max 8 (one reserved for debugging and one for Bluetooth)
• MMC/SD: max 1 (not available if Wi-Fi is installed)
• I2C: max 4
• SPI: max 4
• PWM: max 8
• CAN controlers: max 2
• Audio (I2S, PCM): max 2
• USB OTG Hi-Speed host: 2
• 10M/100Mbits Ethernet: max 2 (1x on module PHY)
• 24bits RGB parallel RGB (up to 1366x768 @ 60Hz): max 1
• Camera parallel input (CSI): max 1
• Resitive touchscreen controller: max 1
• ADC 12bits: max 2
• JTAG (Debugger (ICE) et test)

Power supply

• +3.3VDC 5%

Operating conditions

• Temperature: 0°C..70°C (others in option)

Mechanical

• Dimensions: 67.6 x 30 mm
• Connector: SODIMM 204 pins

RoHS

Yes

Embedded operating system

• Linux 4.4 or upper (preempt-rt and Xenomai extensions available, Buildroot or Debian rootfs)
• NuttX⁽¹⁾
• Bare-metal (no OS)⁽¹⁾

SOM is delivered with U-Boot and Linux pre-installed

⁽¹⁾ disponible on request par volume

⁽²⁾ All peripherals can't be use simultaneously due to pins multiplexing. Please refer to i.MX6UL(L) documentation for more informations.

Presentation

The OPOS6UL_Dev allows you to access all functionnalities of the OPOS6UL module.

All drivers needed to use the onboard peripherals are available in Armadeus public BSP.

Functionalities

• 1x RGB LCD
• 1x USB Host 2.0 High speed
• 1x USB OTG 2.0
• 1x touchscreen (resitive, 4 wires)
• 1x USB mini B for debugging/console
• 1x 10M/100/1000Mbits Ethernet (2nd in option)
• 1x bus CAN (2nd in option)
• 1x RPI® compatible connector
• 1x JTAG
• 1x user LED
• 1x user button
• 1x jumper for boot selection
• 1x Reset button

Connectors

• 1x jack 2.5mm for power suppply (12V)
• Ethernet (RJ45) integrated isolator and status LEDs (2nd connector available on request)
• 2x CAN bus connectors with transceiver (2nd bus available on request)
• 1x USB OTG (type mini B)
• 1x USB Host (type A)
• 1x RPi® compatible connector (2,54 step)
• 1x JTAG (2,54 step)
• 1x LCD+tactile (2,54 step, compatible with ST0700_adapt kit)
• 1x USB serial for debugging (type mini B)
• 1x CSI camera input (2,54 step)
• 2x LEDs (power suppply and user)
• 2x buttons (reset and user)

Power supply

• 12V DC Input voltage

Mechanical

Dimensions: 90mm x 90mm

RoHS

Yes

Schematics

Schematics of the OPOS6UL_Dev in PDF format.

Datasheets

Datasheets of the OPOS6UL in PDF format.

Datasheets of the OPOS6UL_DEV in PDF format.

Please choose the desired characteristics for your SOM: