OPOS6UL Dev

Description

The OPOS6UL_Dev board is a development platform: it is ideal for experimenting and testing simple embedded Linux applications. It has also a Raspberry PI 2 expansion slot to provide additional hardware functionalities

It enables access to most of the OPOS6UL board's functionalities .

All the drivers necessary to use the board features are available in our Linux BSP.

Specific features

One debug/console on USB mini B port
One USB 2.0 High speed port
One USB OTG 2.0 port
One Raspberry PI 2 compatible expansion interface
Touchscreen controller (4 wires resistive)
One LCD port(RGB 18bits)
One 10/100Mbits Ethernet
A second 10/100Mbits Ethernet (optional)
One CAN
A second CAN (optional)
One Camera port (CSI parallel)
One JTAG port
One user LED
One user switch
One jumper for Boot selection
One reset switch

Connectors

Jack 2.5mm for power supply
One SODIMM receptacles for OPOS6UL board
Ethernet (RJ45) with integrated isolation transformer and state leds
Additional Ethernet (RJ45) (optional)
One CAN connector
Additional CAN connector (optional)
One USB connector (type miniB) for debug
One USB host (type A)
One USB OTG (type mini AB)
One Raspberry PI 2 expansion connector (standard 40 pins 2.54mm)
JTAG (2.54mm pins)
LCD and touchscreen connector (2.54mm pins - compatible with the ST0700_adapt kit)
CSI connector (2.54mm pins)